The award you are redeeming still has unused selections! Are you sure you are finished?
Currently Redeeming
Reward
Redeemed So Far
Count
Welcome to your rewards! Thank you for having a party to sell our products. Below is a list of rewards that you have earned. You may redeem each award by clicking it in the list below, and then shop for the products you want from the items presented in the cart. If you change your mind about your selections for a particular award, you may un-redeem it by clicking the red arrow to the left of the award. This will remove the selections you made for that award and you can then redeem it again.
It's simple! Click one of the buttons above to begin redeeming your awards, or if you are finished, click the 'Checkout Now' button to checkout and complete your order.
The selection has been added to your shopping cart
Starting From $ 849.00
*Choose your configuration from options in the drop-down below! New & Improved features! PCO Cell/lamp twists 90 degrees Robust, Vented Ballast - no more over-heating! Two power indicator lights on the front (one for DBI cell, one for PCO cell) Powered by connection to 24VAC (not thermostat circuit) from HVAC System or 24VDC from 100-240VAC transformer (included) FULLY CUSTOMIZABLE! The MCI SynAIRgPure™ 2.0 HVAC Probe is designed to be fully customizable to provide the power you need for your environment. The basic residential unit (16K) can be customized to the load level of the environment and converted to a more powerful residential or commercial unit with the addition of DBI cells. Customizable at time of purchase from 16K ft³ up to 40K ft³ Upgrade an existing unit from 16K ft³ up to 40K ft³ with the addition of DBI cells; Capable of cleaning Residential, Commercial, and Industrial Environments Customization details: Basic 16K = Enhanced PCO cell only 1-3 tons air handler 400cfm-1200cfm airflow 16,000 cubic feet living space (2,000 square feet, assuming 8' ceiling) unit length: 9 inches Upgrade to 24K = Enhanced PCO cell + 1 DBI cell Add 1 DBI cell to convert the basic unit into a 24K unit 3-5 tons air handler 1200cfm-2000cfm airflow 24,000 cubic feet living space (3,000 square feet, assuming 8' ceiling) unit length: 9 inches Upgrade to 40K = Enhanced PCO cell + 2 DBI cells Add 2 DBI cells to convert into a 40K unit 5-10 tons air handler 2000cfm-4000cfm airflow 40,000 cubic feet living space (5,000 square feet, assuming 8' ceiling) unit length: 13 inches Technology Proactive Technology Attacks Pollutants in the air and on surfaces The HVAC-mounted MCI SynAIRgPure 2.0 probe is a new generation air purification enhancement system designed to work with existing purification technology to reduce odors, smoke, and a broad spectrum of indoor air and surface contaminants while cleaning the internal HVAC equipment and ductwork. PCO (Photo-Catalytic Oxidation) Technology promotes a process that turns moisture in the environment into products that continuously clean your space. The PCO cell with UV lamp is great for getting rid of VOC's and significantly increases the amount of area that may be covered by this product, however, actual coverage is dependent on many variables including, but not limited to: air flow, cubic footage, contamination level, surface finishes, age of the structures, air infiltration, and supply distribution. The optional MCI Multi-Cluster Ionization DBI Cell further increases air purification capabilities by adding the benefit of clustered ionization. This process creates additional oxidizers while also charging particulates in the air, causing them to clump together until they fall out of your breathing space. MCI™ (Multi-cluster Ionization) Technology synergistic combination of effective components is the key to its operation and is so effective that it does not require ozone to reach efficacy. Ozone producing UV lamps are an optional upgrade. MCI™ technology is completely safe for humans and animals and effectively destroys mold, mildew, bacteria, viruses, odors, volatile organic com pounds (VOCs and mVOCs) the odors associated with them. Features & Benefits Applications Ideal for any indoor environment where air quality is a concern, such as: Residential Homes Schools, Day Care facilities Business facilities Nursing homes, Hospitals Large Commercial Environments Recreational spaces (art/dance/music studios, Condos) RV's, Motor Homes Benefits Cleans your environment - and the System Helps keep duct systems free from contaminants (increasing oxidizers may be needed for harsh environments) Reduces Bio-nesting Eliminates/reduces mold, bacteria, and the odors associated with them Provides a cleaner “A” coil and, therefore, provides more Energy Efficiency (in return plenum) Reduces “A” coil cleaning and maintenance (25,000 hr. Lamp and Dielectric Barrier Ionization Cells) Provides less frequent filter changes Installation Recommendations This unit is designed to be installed into an existing HVAC system, and used as a virtually maintenance-free enhancement to current air purification technology. SUPPLY: The unit should be installed after the air handler in the HVAC system in the supply plenum sized to match the HVAC equipment coverage area. RETURN: An additional pureAir HVAC unit is recommended in the Return Plenum for added protection and to help keep the internal HVAC parts clean. This dual installation provides cleaning power to the internal equipment and the downstream duct system reducing microbials and other contaminants. The probe in the return air plenum eliminates the need for germicidal lamps shining on the evaporator coils. Factors listed below should be considered when properly sizing the product to an indoor living environment: * Number of Occupants * Pets or Animals * Landscape Features * Carpeting vs. Tile vs. Wood Flooring * Leather vs. Fabric Furniture * Draperies * Air Flow and Ventilation * Placement of Supply Registers * Number and Placement of Return Registers * Recent Renovations or Additions * Use of the Building (Commercial/Residential) * Majority Age of Occupants * Air Infiltration Concerns * Nature of the Contents * Building Use by Hours * Cleaning Schedule and Maintenance * Turnover Traffic Level * Type of Ductwork An opening of 4” diameter will need to be cut into the existing duct work to install the unit properly. The unit is powered by connection to 24VAC (not thermostat circuit) from HVAC System or 24VDC from 100-240VAC transformer (included). MAINTENANCE MCI™ SynAIRgPure 2.0 is effective against a wide range of contaminants in both the air and on surfaces. This technology does not replace the need for any regularly scheduled cleaning maintenance. Please refer to your OWNERS MANUAL for details. It is recommended for optimum performance that the UV lamp be replaced every year, and the MCI™ DBI cell every three years, or when either light goes out. The quad-metallic target plate PCO cell is warranted for the life of the probe against manufacturer defects. The BALLAST carries a 3-year limited warranty that can be extended to 5 years with purchase of the Enhanced Warranty. EPA No. 87947-AR-1 NOTICE: This product Does not meet California air cleaner regulation (AB 2276) requirements: cannot be shipped to California. For Product Support/Repair: Please file a support ticket or call 1.800.728.7206 Enhanced Warranty Available! Extends Manufacturer Warranty to three or five years! When you choose to purchase the optional BLS Enhanced Warranty, you can be confident your unit will continue to provide reliable and trouble-free air purification for a full term of the applicable warranty following the purchase date. VIEW WARRANTY OPTIONS
*Choose your configuration from options in the drop-down below!
The MCI SynAIRgPure™ 2.0 HVAC Probe is designed to be fully customizable to provide the power you need for your environment. The basic residential unit (16K) can be customized to the load level of the environment and converted to a more powerful residential or commercial unit with the addition of DBI cells. Customizable at time of purchase from 16K ft³ up to 40K ft³ Upgrade an existing unit from 16K ft³ up to 40K ft³ with the addition of DBI cells; Capable of cleaning Residential, Commercial, and Industrial Environments Customization details: Basic 16K = Enhanced PCO cell only 1-3 tons air handler 400cfm-1200cfm airflow 16,000 cubic feet living space (2,000 square feet, assuming 8' ceiling) unit length: 9 inches Upgrade to 24K = Enhanced PCO cell + 1 DBI cell Add 1 DBI cell to convert the basic unit into a 24K unit 3-5 tons air handler 1200cfm-2000cfm airflow 24,000 cubic feet living space (3,000 square feet, assuming 8' ceiling) unit length: 9 inches Upgrade to 40K = Enhanced PCO cell + 2 DBI cells Add 2 DBI cells to convert into a 40K unit 5-10 tons air handler 2000cfm-4000cfm airflow 40,000 cubic feet living space (5,000 square feet, assuming 8' ceiling) unit length: 13 inches Technology Proactive Technology Attacks Pollutants in the air and on surfaces The HVAC-mounted MCI SynAIRgPure 2.0 probe is a new generation air purification enhancement system designed to work with existing purification technology to reduce odors, smoke, and a broad spectrum of indoor air and surface contaminants while cleaning the internal HVAC equipment and ductwork. PCO (Photo-Catalytic Oxidation) Technology promotes a process that turns moisture in the environment into products that continuously clean your space. The PCO cell with UV lamp is great for getting rid of VOC's and significantly increases the amount of area that may be covered by this product, however, actual coverage is dependent on many variables including, but not limited to: air flow, cubic footage, contamination level, surface finishes, age of the structures, air infiltration, and supply distribution. The optional MCI Multi-Cluster Ionization DBI Cell further increases air purification capabilities by adding the benefit of clustered ionization. This process creates additional oxidizers while also charging particulates in the air, causing them to clump together until they fall out of your breathing space. MCI™ (Multi-cluster Ionization) Technology synergistic combination of effective components is the key to its operation and is so effective that it does not require ozone to reach efficacy. Ozone producing UV lamps are an optional upgrade. MCI™ technology is completely safe for humans and animals and effectively destroys mold, mildew, bacteria, viruses, odors, volatile organic com pounds (VOCs and mVOCs) the odors associated with them. Features & Benefits Applications Ideal for any indoor environment where air quality is a concern, such as: Residential Homes Schools, Day Care facilities Business facilities Nursing homes, Hospitals Large Commercial Environments Recreational spaces (art/dance/music studios, Condos) RV's, Motor Homes Benefits Cleans your environment - and the System Helps keep duct systems free from contaminants (increasing oxidizers may be needed for harsh environments) Reduces Bio-nesting Eliminates/reduces mold, bacteria, and the odors associated with them Provides a cleaner “A” coil and, therefore, provides more Energy Efficiency (in return plenum) Reduces “A” coil cleaning and maintenance (25,000 hr. Lamp and Dielectric Barrier Ionization Cells) Provides less frequent filter changes Installation Recommendations This unit is designed to be installed into an existing HVAC system, and used as a virtually maintenance-free enhancement to current air purification technology. SUPPLY: The unit should be installed after the air handler in the HVAC system in the supply plenum sized to match the HVAC equipment coverage area. RETURN: An additional pureAir HVAC unit is recommended in the Return Plenum for added protection and to help keep the internal HVAC parts clean. This dual installation provides cleaning power to the internal equipment and the downstream duct system reducing microbials and other contaminants. The probe in the return air plenum eliminates the need for germicidal lamps shining on the evaporator coils. Factors listed below should be considered when properly sizing the product to an indoor living environment: * Number of Occupants * Pets or Animals * Landscape Features * Carpeting vs. Tile vs. Wood Flooring * Leather vs. Fabric Furniture * Draperies * Air Flow and Ventilation * Placement of Supply Registers * Number and Placement of Return Registers * Recent Renovations or Additions * Use of the Building (Commercial/Residential) * Majority Age of Occupants * Air Infiltration Concerns * Nature of the Contents * Building Use by Hours * Cleaning Schedule and Maintenance * Turnover Traffic Level * Type of Ductwork An opening of 4” diameter will need to be cut into the existing duct work to install the unit properly. The unit is powered by connection to 24VAC (not thermostat circuit) from HVAC System or 24VDC from 100-240VAC transformer (included). MAINTENANCE MCI™ SynAIRgPure 2.0 is effective against a wide range of contaminants in both the air and on surfaces. This technology does not replace the need for any regularly scheduled cleaning maintenance. Please refer to your OWNERS MANUAL for details. It is recommended for optimum performance that the UV lamp be replaced every year, and the MCI™ DBI cell every three years, or when either light goes out. The quad-metallic target plate PCO cell is warranted for the life of the probe against manufacturer defects. The BALLAST carries a 3-year limited warranty that can be extended to 5 years with purchase of the Enhanced Warranty. EPA No. 87947-AR-1 NOTICE: This product Does not meet California air cleaner regulation (AB 2276) requirements: cannot be shipped to California. For Product Support/Repair: Please file a support ticket or call 1.800.728.7206 Enhanced Warranty Available! Extends Manufacturer Warranty to three or five years! When you choose to purchase the optional BLS Enhanced Warranty, you can be confident your unit will continue to provide reliable and trouble-free air purification for a full term of the applicable warranty following the purchase date. VIEW WARRANTY OPTIONS
The MCI SynAIRgPure™ 2.0 HVAC Probe is designed to be fully customizable to provide the power you need for your environment. The basic residential unit (16K) can be customized to the load level of the environment and converted to a more powerful residential or commercial unit with the addition of DBI cells.
Customization details:
Upgrade to 24K = Enhanced PCO cell + 1 DBI cell Add 1 DBI cell to convert the basic unit into a 24K unit 3-5 tons air handler 1200cfm-2000cfm airflow 24,000 cubic feet living space (3,000 square feet, assuming 8' ceiling) unit length: 9 inches Upgrade to 40K = Enhanced PCO cell + 2 DBI cells Add 2 DBI cells to convert into a 40K unit 5-10 tons air handler 2000cfm-4000cfm airflow 40,000 cubic feet living space (5,000 square feet, assuming 8' ceiling) unit length: 13 inches
Upgrade to 40K = Enhanced PCO cell + 2 DBI cells Add 2 DBI cells to convert into a 40K unit 5-10 tons air handler 2000cfm-4000cfm airflow 40,000 cubic feet living space (5,000 square feet, assuming 8' ceiling) unit length: 13 inches
Proactive Technology Attacks Pollutants in the air and on surfaces The HVAC-mounted MCI SynAIRgPure 2.0 probe is a new generation air purification enhancement system designed to work with existing purification technology to reduce odors, smoke, and a broad spectrum of indoor air and surface contaminants while cleaning the internal HVAC equipment and ductwork. PCO (Photo-Catalytic Oxidation) Technology promotes a process that turns moisture in the environment into products that continuously clean your space. The PCO cell with UV lamp is great for getting rid of VOC's and significantly increases the amount of area that may be covered by this product, however, actual coverage is dependent on many variables including, but not limited to: air flow, cubic footage, contamination level, surface finishes, age of the structures, air infiltration, and supply distribution. The optional MCI Multi-Cluster Ionization DBI Cell further increases air purification capabilities by adding the benefit of clustered ionization. This process creates additional oxidizers while also charging particulates in the air, causing them to clump together until they fall out of your breathing space. MCI™ (Multi-cluster Ionization) Technology synergistic combination of effective components is the key to its operation and is so effective that it does not require ozone to reach efficacy. Ozone producing UV lamps are an optional upgrade. MCI™ technology is completely safe for humans and animals and effectively destroys mold, mildew, bacteria, viruses, odors, volatile organic com pounds (VOCs and mVOCs) the odors associated with them. Features & Benefits Applications Ideal for any indoor environment where air quality is a concern, such as: Residential Homes Schools, Day Care facilities Business facilities Nursing homes, Hospitals Large Commercial Environments Recreational spaces (art/dance/music studios, Condos) RV's, Motor Homes Benefits Cleans your environment - and the System Helps keep duct systems free from contaminants (increasing oxidizers may be needed for harsh environments) Reduces Bio-nesting Eliminates/reduces mold, bacteria, and the odors associated with them Provides a cleaner “A” coil and, therefore, provides more Energy Efficiency (in return plenum) Reduces “A” coil cleaning and maintenance (25,000 hr. Lamp and Dielectric Barrier Ionization Cells) Provides less frequent filter changes Installation Recommendations This unit is designed to be installed into an existing HVAC system, and used as a virtually maintenance-free enhancement to current air purification technology. SUPPLY: The unit should be installed after the air handler in the HVAC system in the supply plenum sized to match the HVAC equipment coverage area. RETURN: An additional pureAir HVAC unit is recommended in the Return Plenum for added protection and to help keep the internal HVAC parts clean. This dual installation provides cleaning power to the internal equipment and the downstream duct system reducing microbials and other contaminants. The probe in the return air plenum eliminates the need for germicidal lamps shining on the evaporator coils. Factors listed below should be considered when properly sizing the product to an indoor living environment: * Number of Occupants * Pets or Animals * Landscape Features * Carpeting vs. Tile vs. Wood Flooring * Leather vs. Fabric Furniture * Draperies * Air Flow and Ventilation * Placement of Supply Registers * Number and Placement of Return Registers * Recent Renovations or Additions * Use of the Building (Commercial/Residential) * Majority Age of Occupants * Air Infiltration Concerns * Nature of the Contents * Building Use by Hours * Cleaning Schedule and Maintenance * Turnover Traffic Level * Type of Ductwork An opening of 4” diameter will need to be cut into the existing duct work to install the unit properly. The unit is powered by connection to 24VAC (not thermostat circuit) from HVAC System or 24VDC from 100-240VAC transformer (included). MAINTENANCE MCI™ SynAIRgPure 2.0 is effective against a wide range of contaminants in both the air and on surfaces. This technology does not replace the need for any regularly scheduled cleaning maintenance. Please refer to your OWNERS MANUAL for details. It is recommended for optimum performance that the UV lamp be replaced every year, and the MCI™ DBI cell every three years, or when either light goes out. The quad-metallic target plate PCO cell is warranted for the life of the probe against manufacturer defects. The BALLAST carries a 3-year limited warranty that can be extended to 5 years with purchase of the Enhanced Warranty. EPA No. 87947-AR-1 NOTICE: This product Does not meet California air cleaner regulation (AB 2276) requirements: cannot be shipped to California. For Product Support/Repair: Please file a support ticket or call 1.800.728.7206 Enhanced Warranty Available! Extends Manufacturer Warranty to three or five years! When you choose to purchase the optional BLS Enhanced Warranty, you can be confident your unit will continue to provide reliable and trouble-free air purification for a full term of the applicable warranty following the purchase date. VIEW WARRANTY OPTIONS
Proactive Technology Attacks Pollutants in the air and on surfaces
The HVAC-mounted MCI SynAIRgPure 2.0 probe is a new generation air purification enhancement system designed to work with existing purification technology to reduce odors, smoke, and a broad spectrum of indoor air and surface contaminants while cleaning the internal HVAC equipment and ductwork.
PCO (Photo-Catalytic Oxidation) Technology promotes a process that turns moisture in the environment into products that continuously clean your space. The PCO cell with UV lamp is great for getting rid of VOC's and significantly increases the amount of area that may be covered by this product, however, actual coverage is dependent on many variables including, but not limited to: air flow, cubic footage, contamination level, surface finishes, age of the structures, air infiltration, and supply distribution. The optional MCI Multi-Cluster Ionization DBI Cell further increases air purification capabilities by adding the benefit of clustered ionization. This process creates additional oxidizers while also charging particulates in the air, causing them to clump together until they fall out of your breathing space. MCI™ (Multi-cluster Ionization) Technology synergistic combination of effective components is the key to its operation and is so effective that it does not require ozone to reach efficacy. Ozone producing UV lamps are an optional upgrade. MCI™ technology is completely safe for humans and animals and effectively destroys mold, mildew, bacteria, viruses, odors, volatile organic com pounds (VOCs and mVOCs) the odors associated with them. Features & Benefits Applications Ideal for any indoor environment where air quality is a concern, such as: Residential Homes Schools, Day Care facilities Business facilities Nursing homes, Hospitals Large Commercial Environments Recreational spaces (art/dance/music studios, Condos) RV's, Motor Homes Benefits Cleans your environment - and the System Helps keep duct systems free from contaminants (increasing oxidizers may be needed for harsh environments) Reduces Bio-nesting Eliminates/reduces mold, bacteria, and the odors associated with them Provides a cleaner “A” coil and, therefore, provides more Energy Efficiency (in return plenum) Reduces “A” coil cleaning and maintenance (25,000 hr. Lamp and Dielectric Barrier Ionization Cells) Provides less frequent filter changes Installation Recommendations This unit is designed to be installed into an existing HVAC system, and used as a virtually maintenance-free enhancement to current air purification technology. SUPPLY: The unit should be installed after the air handler in the HVAC system in the supply plenum sized to match the HVAC equipment coverage area. RETURN: An additional pureAir HVAC unit is recommended in the Return Plenum for added protection and to help keep the internal HVAC parts clean. This dual installation provides cleaning power to the internal equipment and the downstream duct system reducing microbials and other contaminants. The probe in the return air plenum eliminates the need for germicidal lamps shining on the evaporator coils. Factors listed below should be considered when properly sizing the product to an indoor living environment: * Number of Occupants * Pets or Animals * Landscape Features * Carpeting vs. Tile vs. Wood Flooring * Leather vs. Fabric Furniture * Draperies * Air Flow and Ventilation * Placement of Supply Registers * Number and Placement of Return Registers * Recent Renovations or Additions * Use of the Building (Commercial/Residential) * Majority Age of Occupants * Air Infiltration Concerns * Nature of the Contents * Building Use by Hours * Cleaning Schedule and Maintenance * Turnover Traffic Level * Type of Ductwork An opening of 4” diameter will need to be cut into the existing duct work to install the unit properly. The unit is powered by connection to 24VAC (not thermostat circuit) from HVAC System or 24VDC from 100-240VAC transformer (included). MAINTENANCE MCI™ SynAIRgPure 2.0 is effective against a wide range of contaminants in both the air and on surfaces. This technology does not replace the need for any regularly scheduled cleaning maintenance. Please refer to your OWNERS MANUAL for details. It is recommended for optimum performance that the UV lamp be replaced every year, and the MCI™ DBI cell every three years, or when either light goes out. The quad-metallic target plate PCO cell is warranted for the life of the probe against manufacturer defects. The BALLAST carries a 3-year limited warranty that can be extended to 5 years with purchase of the Enhanced Warranty. EPA No. 87947-AR-1 NOTICE: This product Does not meet California air cleaner regulation (AB 2276) requirements: cannot be shipped to California. For Product Support/Repair: Please file a support ticket or call 1.800.728.7206 Enhanced Warranty Available! Extends Manufacturer Warranty to three or five years! When you choose to purchase the optional BLS Enhanced Warranty, you can be confident your unit will continue to provide reliable and trouble-free air purification for a full term of the applicable warranty following the purchase date. VIEW WARRANTY OPTIONS
PCO (Photo-Catalytic Oxidation) Technology promotes a process that turns moisture in the environment into products that continuously clean your space. The PCO cell with UV lamp is great for getting rid of VOC's and significantly increases the amount of area that may be covered by this product, however, actual coverage is dependent on many variables including, but not limited to: air flow, cubic footage, contamination level, surface finishes, age of the structures, air infiltration, and supply distribution.
The optional MCI Multi-Cluster Ionization DBI Cell further increases air purification capabilities by adding the benefit of clustered ionization. This process creates additional oxidizers while also charging particulates in the air, causing them to clump together until they fall out of your breathing space. MCI™ (Multi-cluster Ionization) Technology synergistic combination of effective components is the key to its operation and is so effective that it does not require ozone to reach efficacy. Ozone producing UV lamps are an optional upgrade. MCI™ technology is completely safe for humans and animals and effectively destroys mold, mildew, bacteria, viruses, odors, volatile organic com pounds (VOCs and mVOCs) the odors associated with them. Features & Benefits Applications Ideal for any indoor environment where air quality is a concern, such as: Residential Homes Schools, Day Care facilities Business facilities Nursing homes, Hospitals Large Commercial Environments Recreational spaces (art/dance/music studios, Condos) RV's, Motor Homes Benefits Cleans your environment - and the System Helps keep duct systems free from contaminants (increasing oxidizers may be needed for harsh environments) Reduces Bio-nesting Eliminates/reduces mold, bacteria, and the odors associated with them Provides a cleaner “A” coil and, therefore, provides more Energy Efficiency (in return plenum) Reduces “A” coil cleaning and maintenance (25,000 hr. Lamp and Dielectric Barrier Ionization Cells) Provides less frequent filter changes Installation Recommendations This unit is designed to be installed into an existing HVAC system, and used as a virtually maintenance-free enhancement to current air purification technology. SUPPLY: The unit should be installed after the air handler in the HVAC system in the supply plenum sized to match the HVAC equipment coverage area. RETURN: An additional pureAir HVAC unit is recommended in the Return Plenum for added protection and to help keep the internal HVAC parts clean. This dual installation provides cleaning power to the internal equipment and the downstream duct system reducing microbials and other contaminants. The probe in the return air plenum eliminates the need for germicidal lamps shining on the evaporator coils. Factors listed below should be considered when properly sizing the product to an indoor living environment: * Number of Occupants * Pets or Animals * Landscape Features * Carpeting vs. Tile vs. Wood Flooring * Leather vs. Fabric Furniture * Draperies * Air Flow and Ventilation * Placement of Supply Registers * Number and Placement of Return Registers * Recent Renovations or Additions * Use of the Building (Commercial/Residential) * Majority Age of Occupants * Air Infiltration Concerns * Nature of the Contents * Building Use by Hours * Cleaning Schedule and Maintenance * Turnover Traffic Level * Type of Ductwork An opening of 4” diameter will need to be cut into the existing duct work to install the unit properly. The unit is powered by connection to 24VAC (not thermostat circuit) from HVAC System or 24VDC from 100-240VAC transformer (included). MAINTENANCE MCI™ SynAIRgPure 2.0 is effective against a wide range of contaminants in both the air and on surfaces. This technology does not replace the need for any regularly scheduled cleaning maintenance. Please refer to your OWNERS MANUAL for details. It is recommended for optimum performance that the UV lamp be replaced every year, and the MCI™ DBI cell every three years, or when either light goes out. The quad-metallic target plate PCO cell is warranted for the life of the probe against manufacturer defects. The BALLAST carries a 3-year limited warranty that can be extended to 5 years with purchase of the Enhanced Warranty. EPA No. 87947-AR-1 NOTICE: This product Does not meet California air cleaner regulation (AB 2276) requirements: cannot be shipped to California. For Product Support/Repair: Please file a support ticket or call 1.800.728.7206 Enhanced Warranty Available! Extends Manufacturer Warranty to three or five years! When you choose to purchase the optional BLS Enhanced Warranty, you can be confident your unit will continue to provide reliable and trouble-free air purification for a full term of the applicable warranty following the purchase date. VIEW WARRANTY OPTIONS
MCI™ (Multi-cluster Ionization) Technology synergistic combination of effective components is the key to its operation and is so effective that it does not require ozone to reach efficacy. Ozone producing UV lamps are an optional upgrade.
MCI™ technology is completely safe for humans and animals and effectively destroys mold, mildew, bacteria, viruses, odors, volatile organic com pounds (VOCs and mVOCs) the odors associated with them.
Applications Ideal for any indoor environment where air quality is a concern, such as: Residential Homes Schools, Day Care facilities Business facilities Nursing homes, Hospitals Large Commercial Environments Recreational spaces (art/dance/music studios, Condos) RV's, Motor Homes Benefits Cleans your environment - and the System Helps keep duct systems free from contaminants (increasing oxidizers may be needed for harsh environments) Reduces Bio-nesting Eliminates/reduces mold, bacteria, and the odors associated with them Provides a cleaner “A” coil and, therefore, provides more Energy Efficiency (in return plenum) Reduces “A” coil cleaning and maintenance (25,000 hr. Lamp and Dielectric Barrier Ionization Cells) Provides less frequent filter changes Installation Recommendations This unit is designed to be installed into an existing HVAC system, and used as a virtually maintenance-free enhancement to current air purification technology. SUPPLY: The unit should be installed after the air handler in the HVAC system in the supply plenum sized to match the HVAC equipment coverage area. RETURN: An additional pureAir HVAC unit is recommended in the Return Plenum for added protection and to help keep the internal HVAC parts clean. This dual installation provides cleaning power to the internal equipment and the downstream duct system reducing microbials and other contaminants. The probe in the return air plenum eliminates the need for germicidal lamps shining on the evaporator coils. Factors listed below should be considered when properly sizing the product to an indoor living environment: * Number of Occupants * Pets or Animals * Landscape Features * Carpeting vs. Tile vs. Wood Flooring * Leather vs. Fabric Furniture * Draperies * Air Flow and Ventilation * Placement of Supply Registers * Number and Placement of Return Registers * Recent Renovations or Additions * Use of the Building (Commercial/Residential) * Majority Age of Occupants * Air Infiltration Concerns * Nature of the Contents * Building Use by Hours * Cleaning Schedule and Maintenance * Turnover Traffic Level * Type of Ductwork An opening of 4” diameter will need to be cut into the existing duct work to install the unit properly. The unit is powered by connection to 24VAC (not thermostat circuit) from HVAC System or 24VDC from 100-240VAC transformer (included). MAINTENANCE MCI™ SynAIRgPure 2.0 is effective against a wide range of contaminants in both the air and on surfaces. This technology does not replace the need for any regularly scheduled cleaning maintenance. Please refer to your OWNERS MANUAL for details. It is recommended for optimum performance that the UV lamp be replaced every year, and the MCI™ DBI cell every three years, or when either light goes out. The quad-metallic target plate PCO cell is warranted for the life of the probe against manufacturer defects. The BALLAST carries a 3-year limited warranty that can be extended to 5 years with purchase of the Enhanced Warranty. EPA No. 87947-AR-1 NOTICE: This product Does not meet California air cleaner regulation (AB 2276) requirements: cannot be shipped to California. For Product Support/Repair: Please file a support ticket or call 1.800.728.7206 Enhanced Warranty Available! Extends Manufacturer Warranty to three or five years! When you choose to purchase the optional BLS Enhanced Warranty, you can be confident your unit will continue to provide reliable and trouble-free air purification for a full term of the applicable warranty following the purchase date. VIEW WARRANTY OPTIONS
Applications
Ideal for any indoor environment where air quality is a concern, such as:
Benefits
Cleans your environment - and the System
This unit is designed to be installed into an existing HVAC system, and used as a virtually maintenance-free enhancement to current air purification technology. SUPPLY: The unit should be installed after the air handler in the HVAC system in the supply plenum sized to match the HVAC equipment coverage area. RETURN: An additional pureAir HVAC unit is recommended in the Return Plenum for added protection and to help keep the internal HVAC parts clean. This dual installation provides cleaning power to the internal equipment and the downstream duct system reducing microbials and other contaminants. The probe in the return air plenum eliminates the need for germicidal lamps shining on the evaporator coils. Factors listed below should be considered when properly sizing the product to an indoor living environment: * Number of Occupants * Pets or Animals * Landscape Features * Carpeting vs. Tile vs. Wood Flooring * Leather vs. Fabric Furniture * Draperies * Air Flow and Ventilation * Placement of Supply Registers * Number and Placement of Return Registers * Recent Renovations or Additions * Use of the Building (Commercial/Residential) * Majority Age of Occupants * Air Infiltration Concerns * Nature of the Contents * Building Use by Hours * Cleaning Schedule and Maintenance * Turnover Traffic Level * Type of Ductwork An opening of 4” diameter will need to be cut into the existing duct work to install the unit properly. The unit is powered by connection to 24VAC (not thermostat circuit) from HVAC System or 24VDC from 100-240VAC transformer (included). MAINTENANCE MCI™ SynAIRgPure 2.0 is effective against a wide range of contaminants in both the air and on surfaces. This technology does not replace the need for any regularly scheduled cleaning maintenance. Please refer to your OWNERS MANUAL for details. It is recommended for optimum performance that the UV lamp be replaced every year, and the MCI™ DBI cell every three years, or when either light goes out. The quad-metallic target plate PCO cell is warranted for the life of the probe against manufacturer defects. The BALLAST carries a 3-year limited warranty that can be extended to 5 years with purchase of the Enhanced Warranty. EPA No. 87947-AR-1 NOTICE: This product Does not meet California air cleaner regulation (AB 2276) requirements: cannot be shipped to California. For Product Support/Repair: Please file a support ticket or call 1.800.728.7206 Enhanced Warranty Available! Extends Manufacturer Warranty to three or five years! When you choose to purchase the optional BLS Enhanced Warranty, you can be confident your unit will continue to provide reliable and trouble-free air purification for a full term of the applicable warranty following the purchase date. VIEW WARRANTY OPTIONS
This unit is designed to be installed into an existing HVAC system, and used as a virtually maintenance-free enhancement to current air purification technology.
SUPPLY: The unit should be installed after the air handler in the HVAC system in the supply plenum sized to match the HVAC equipment coverage area.
RETURN: An additional pureAir HVAC unit is recommended in the Return Plenum for added protection and to help keep the internal HVAC parts clean.
This dual installation provides cleaning power to the internal equipment and the downstream duct system reducing microbials and other contaminants. The probe in the return air plenum eliminates the need for germicidal lamps shining on the evaporator coils.
Factors listed below should be considered when properly sizing the product to an indoor living environment:
* Number of Occupants * Pets or Animals * Landscape Features * Carpeting vs. Tile vs. Wood Flooring * Leather vs. Fabric Furniture * Draperies * Air Flow and Ventilation * Placement of Supply Registers * Number and Placement of Return Registers * Recent Renovations or Additions * Use of the Building (Commercial/Residential) * Majority Age of Occupants * Air Infiltration Concerns * Nature of the Contents * Building Use by Hours * Cleaning Schedule and Maintenance * Turnover Traffic Level * Type of Ductwork
An opening of 4” diameter will need to be cut into the existing duct work to install the unit properly. The unit is powered by connection to 24VAC (not thermostat circuit) from HVAC System or 24VDC from 100-240VAC transformer (included).
MCI™ SynAIRgPure 2.0 is effective against a wide range of contaminants in both the air and on surfaces. This technology does not replace the need for any regularly scheduled cleaning maintenance. Please refer to your OWNERS MANUAL for details. It is recommended for optimum performance that the UV lamp be replaced every year, and the MCI™ DBI cell every three years, or when either light goes out. The quad-metallic target plate PCO cell is warranted for the life of the probe against manufacturer defects. The BALLAST carries a 3-year limited warranty that can be extended to 5 years with purchase of the Enhanced Warranty. EPA No. 87947-AR-1 NOTICE: This product Does not meet California air cleaner regulation (AB 2276) requirements: cannot be shipped to California. For Product Support/Repair: Please file a support ticket or call 1.800.728.7206
MCI™ SynAIRgPure 2.0 is effective against a wide range of contaminants in both the air and on surfaces. This technology does not replace the need for any regularly scheduled cleaning maintenance. Please refer to your OWNERS MANUAL for details.
It is recommended for optimum performance that the UV lamp be replaced every year, and the MCI™ DBI cell every three years, or when either light goes out. The quad-metallic target plate PCO cell is warranted for the life of the probe against manufacturer defects. The BALLAST carries a 3-year limited warranty that can be extended to 5 years with purchase of the Enhanced Warranty.
EPA No. 87947-AR-1
NOTICE: This product Does not meet California air cleaner regulation (AB 2276) requirements: cannot be shipped to California.
Enhanced Warranty Available! Extends Manufacturer Warranty to three or five years!
When you choose to purchase the optional BLS Enhanced Warranty, you can be confident your unit will continue to provide reliable and trouble-free air purification for a full term of the applicable warranty following the purchase date. VIEW WARRANTY OPTIONS
Quantity
Please share your opinions on this product with other shoppers Take the opportunity to share your opinion about this exciting product! Click the 'Write A Review' button below to add your review to our site.
